Difference between revisions of "Sodium bisulfite"

From Sciencemadness Wiki
Jump to: navigation, search
Line 52: Line 52:
 
| BoilingPt_ref =  
 
| BoilingPt_ref =  
 
| BoilingPt_notes = (decomposes)
 
| BoilingPt_notes = (decomposes)
| Density = 1.48 g/cm<sup>3</sup>
+
| Density = 1.48 g/cm<sup>3</sup> (at 20 °C)
 
| Formula = NaHSO<sub>3</sub>
 
| Formula = NaHSO<sub>3</sub>
 
| HenryConstant =  
 
| HenryConstant =  

Revision as of 20:19, 25 August 2016

Sodium bisulfite
Names
IUPAC name
Sodium hydrogen sulfite
Other names
E222
Monosodium sulfite
Sodium bisulphite
Properties
NaHSO3
Molar mass 104.061 g/mol
Appearance White or white-yellowish crystalline solid
Odor Slight sulfurous odor
Density 1.48 g/cm3 (at 20 °C)
Melting point 150 °C (302 °F; 423 K) (decomposition begins at 104 °C)
Boiling point 315 °C (599 °F; 588 K) (decomposes)
42 g/100 mL
Acidity (pKa) 6.97
Hazards
Safety data sheet FisherScientific
Lethal dose or concentration (LD, LC):
2340 mg/kg (oral, rat)
Related compounds
Related compounds
Sodium bisulfate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Sodium bisulfite or sodium hydrogen sulfite is an air sensitive chemical compound with the formula NaHSO3, mostly used as food additive (E222).

Properties

Chemical

Sodium bisulfite will slowly oxidize in air to sodium bisulfate:

NaHSO3 + ½ O2 → NaHSO4

Small quantities of sulfur dioxide and water are released during the reaction, with sodium sulfate also forming.

Physical

Sodium bisulfite is a white or white-yellowish solid, with a slight sulfurous odor and a disagreeable taste. It is soluble in water. It melts at 150°C, and decomposes at 315 °C, with first signs of decomposition appearing around 100-104 °C.

Availability

Sodium bisulfite can be purchased online. Some winemaking suppliers may have it in their stock.

Preparation

Sodium bisulfite can be prepared by bubbling excess sulfur dioxide through a solution of sodium carbonate or sodium hydroxide. Make sure no air is present in the sulfur dioxide stream, as it will oxidize the bisulfite to bisulfate. Since heat decomposes the bisulfate, the water can only be removed via vacuum. Do this until you see sodium bisulfite starting to precipitate/crystallize out of the solution. The solution is further cooled in a low oxygen medium to extract as much compound from the solution as possible. The resulting crystals are vacuum filtered and washed with cold water or ethanol. The wet solid is dried in a vacuum desiccator.[1]

Projects

Handling

Safety

Sodium bisulfite is irritant.

Storage

Sodium bisulfite should be stored in air-tight bottles, as it will slowly oxidize in open air. Aqueous solutions rapidly oxidize in air.

Disposal

Can be neutralized with bleach, hydrogen peroxide.

References

  1. http://www.prepchem.com/synthesis-of-sodium-bisulfite/

Relevant Sciencemadness threads