Toluene

From Sciencemadness Wiki
Revision as of 19:14, 15 September 2022 by Mabus (Talk | contribs)

Jump to: navigation, search
Toluene
Toluene-0.png
Names
IUPAC name
Toluene
Preferred IUPAC name
Toluene
Systematic IUPAC name
Methylbenzene
Other names
Anisen
Phenylmethane
Toluol
Properties
C7H8
C6H5CH3
Molar mass 92.14 g/mol
Appearance Colorless shiny liquid
Odor Aromatic, "shoe glue"-like
Density 0.870 g/cm3 (20 °C)
Melting point −95 °C (−139 °F; 178 K)
Boiling point 111 °C (232 °F; 384 K)
0.052 g/100 ml (20 °C)
Solubility Miscible with glacial acetic acid, acetone, carbon disulfide, chloroform, diethyl ether, ethanol, hexane, pyridine, xylene
Vapor pressure 2.8 kPa (20 °C)
Hazards
Safety data sheet Sigma-Aldrich
Flash point 6 °C (43 °F; 279 K)
Lethal dose or concentration (LD, LC):
>26,700 ppm (rat, 1 hr)
400 ppm (mouse, 24 hr)
Related compounds
Related compounds
Benzene
Xylene
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Toluene or methylbenzene is a clear, water-insoluble organic liquid, used as paint thinner and organic solvent. It is an aromatic hydrocarbon.

Properties

Chemical

The methyl group makes toluene around 25 times more reactive than benzene in electrophilic aromatic substitutions. The addition of a halogen in the presence of UV light will yield benzyl halides. Potassium permanganate will oxidize toluene to yield benzoic acid.

C6H5CH3 + [O] → C6H5COOH

Physical

Toluene is liquid at standard conditions, with a characteristic sweet, solvent-like smell. It is less dense than water, with a density of 0.87 g/ml. Toluene melts at -95 °C and boils at 111 °C. It is insoluble in water, but in vapor phase will form an azeotrope. Toluene is miscible with many organic solvents, like alcohols and esters. Toluene has a high refractive index, which causes it to exhibit iridescence.

Availability

Toluene is available at hardware as paint thinner, sometimes relative pure, but most of the time is mixed with other hydrocarbons, ketones, depending on the product. Butanol and/or butyl acetate tends to be added most often in toluene-based solvents. Fractional distillation can be used to distill the components. Some solvents and thinners contain toluene mixed with water-miscible organics; technical grade toluene can be separated from such solvents by adding water.

Relative pure toluene can also be found in various shoe repair shops.

Preparation

There are a few ways to prepare toluene. One method involves the methylation of benzene with a methyl halide, such as methyl chloride in the presence of anhydrous aluminium chloride. Since toluene is less toxic than benzene, this is a good way, albeit consuming, to eliminate benzene.

However, making toluene in bulk through this method is not very practical and economical, and it's cheaper to simply buy toluene from the store than to make it yourself.

Projects

Handling

Safety

Toluene vapors can cause headaches, dizziness, nausea, so work should be performed in a fume hood or outside. Toluene is less toxic and carcinogenic than benzene, meaning it can be used as a substitute for benzene as a solvent.

Storage

Toluene is less volatile than other hydrocarbons, but due to its strong smell it's best to store it in closed bottles, and kept in a solvent cabinet.

Disposal

Burning toluene will release soot, so it's best to do this outside. Since the burning is incomplete, the resulting smoke will have plenty of soot, carbon monoxide as well as unburnt toluene vapors, giving the smoke a characteristic smell. If you're using this method, try not to burn too much toluene at once, and instead burn it in small amounts over a longer period of time.

Since it's an aromatic, Fenton's reagent can also be a good choice to destroy it. Talk:Toluene However, the said method produces lots of gasses which will aerosolize some toluene, if too much is added. This is dangerous in an enclosed area, carrying both a fire/explosion hazard as well as inhaling dangerous toluene fumes. This can be controlled by adding the toluene dropwise or bubbling (non-flammable) gas-carried toluene through a gas diffusing stone (make sure the toluene can pass through the frite) through the oxidizing solution to limit vapor escape. Either perform the neutralization in a fumehood, or outside. Doing it outside is desired, as UV light will catalyze the decomposition. If you want to use a photochemical neutralization, it's best to use a UV lamp.

References

Relevant Sciencemadness threads