Difference between revisions of "Iron(II) sulfate"

From Sciencemadness Wiki
Jump to: navigation, search
(added image)
 
(14 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[File:Iron(II) sulfate Zts16.jpg|thumb|240px|Iron(II) sulfate heptahydrate prepared from steel and sulfuric acid (looks more blue in person)]]
+
{{Chembox
'''Iron(II) sulfate''', also known as '''ferrous sulfate '''is the sulfate salt of the iron(II) ion. It is most commonly seen as the heptahydrate which forms blue-green crystals. It is a brownish-white powder when anhydrous.
+
| Name = Iron(II) sulfate
 +
| Reference =
 +
| IUPACName = Iron(II) sulfate
 +
| PIN =
 +
| SystematicName =
 +
| OtherNames = Copperas, ferrous sulfate, green vitriol, iron vitriol, melanterite, szomolnokite
 +
<!-- Images -->
 +
| ImageFile = Iron(II) sulfate Zts16.jpg
 +
| ImageSize = 240
 +
| ImageAlt =
 +
| ImageName =
 +
| ImageCaption = Iron(II) sulfate heptahydrate prepared from steel and sulfuric acid (looks more blue in person)
 +
| ImageFile1 =
 +
| ImageSize1 =
 +
| ImageAlt1 =
 +
| ImageName1 =
 +
| ImageFile2 =
 +
| ImageSize2 =
 +
| ImageAlt2 =
 +
| ImageName2 =
 +
| ImageFile3 =
 +
| ImageSize3 =
 +
| ImageAlt3 =
 +
| ImageName3 =
 +
| ImageFileL1 =
 +
| ImageSizeL1 =
 +
| ImageAltL1 =
 +
| ImageNameL1 =
 +
| ImageFileR1 =
 +
| ImageSizeR1 =
 +
| ImageAltR1 =
 +
| ImageNameR1 =
 +
| ImageFileL2 =
 +
| ImageSizeL2 =
 +
| ImageAltL2 =
 +
| ImageNameL2 =
 +
| ImageFileR2 =
 +
| ImageSizeR2 =
 +
| ImageAltR2 =
 +
| ImageNameR2 =
 +
<!-- Sections -->
 +
| Section1 = {{Chembox Identifiers
 +
| 3DMet =
 +
| Abbreviations =
 +
| SMILES =
 +
  }}
 +
| Section2 = {{Chembox Properties
 +
| AtmosphericOHRateConstant =
 +
| Appearance = White crystals (anhydrous)<br>White-yellow crystals (monohydrate)<br>Blue-green crystals (heptahydrate)
 +
| BoilingPt =
 +
| BoilingPtC =
 +
| BoilingPt_ref =
 +
| BoilingPt_notes = Decomposes
 +
| Density = 3.65 g/cm<sup>3</sup> (anhydrous)<br>3 g/cm<sup>3</sup> (monohydrate)<br>2.15 g/cm<sup>3</sup> (pentahydrate)<br>1.934 g/cm<sup>3</sup> (hexahydrate)<br>1.895 g/cm<sup>3</sup> (heptahydrate)
 +
| Formula = FeSO<sub>4</sub> (anhydrous)<br>FeSO<sub>4</sub>·H<sub>2</sub>O (monohydrate)<br>FeSO<sub>4</sub>·5 H<sub>2</sub>O (pentahydrate)<br>FeSO<sub>4</sub>·6 H<sub>2</sub>O (hexahydrate)<br>FeSO<sub>4</sub>·7 H<sub>2</sub>O (heptahydrate)
 +
| HenryConstant =
 +
| LogP =
 +
| MolarMass = 151.91 g/mol (anhydrous)<br>169.93 g/mol (monohydrate)<br>241.99 g/mol (pentahydrate)<br>260.00 g/mol (hexahydrate)<br>278.02 g/mol (heptahydrate)
 +
| MeltingPt =
 +
| MeltingPtC =
 +
| MeltingPt_ref =
 +
| MeltingPt_notes = ''anhydrous''<br>680 °C (1,256 °F; 953 K) (decomposes)<br>''monohydrate''<br>300 °C (572 °F; 573 K) (decomposes)<br>''heptahydrate''<br>60–64 °C (140–147 °F; 333–337 K) (decomposes)
 +
| Odor = Odorless
 +
| pKa =
 +
| pKb =
 +
| Solubility = ''Monohydrate''<br>44.69 g/100 ml (77 °C)<br>35.97 g/100 ml (90.1 °C)<br>''Heptahydrate''<br>15.65 g/100 ml (0 °C)<br>20.5 g/100 ml (10 °C)<br>29.51 g/100 ml (25 °C)<br>39.89 g/100 ml (40.1 °C)<br>51.35 g/100 ml (54 °C)
 +
| SolubleOther = Slightly soluble in acids, [[ethanol]], [[methanol]]<br>Insoluble in hydrocarbons
 +
| Solubility1 =6.4 g/100 g (20 °C)
 +
| Solvent1 = ethylene glycol
 +
| VaporPressure = 1.95 kPa (heptahydrate)
 +
  }}
 +
| Section3 = {{Chembox Structure
 +
| Coordination =
 +
| CrystalStruct =
 +
| MolShape =
 +
  }}
 +
| Section4 = {{Chembox Thermochemistry
 +
| DeltaGf =
 +
| DeltaHc =
 +
| DeltaHf =
 +
| Entropy =
 +
| HeatCapacity =
 +
  }}
 +
| Section5 = {{Chembox Explosive
 +
| ShockSens = Non-explosive
 +
| FrictionSens = Non-explosive
 +
| DetonationV = Non-explosive
 +
| REFactor = Non-explosive
 +
  }}
 +
| Section6 = {{Chembox Hazards
 +
| AutoignitionPt = Non-flammable
 +
| ExploLimits = Non-explosive
 +
| ExternalMSDS = [https://www.docdroid.net/hZwVSlX/ironiii-sulfate-hydrate-sa.pdf.html Sigma-Aldrich] (heptahydrate)
 +
| FlashPt = Non-flammable
 +
| LD50 =
 +
| LC50 =
 +
| MainHazards = Irritant
 +
| NFPA-F =
 +
| NFPA-H =
 +
| NFPA-R =
 +
| NFPA-S =
 +
  }}
 +
| Section7 = {{Chembox Related
 +
| OtherAnions =
 +
| OtherCations =
 +
| OtherFunction =
 +
| OtherFunction_label =
 +
| OtherCompounds = [[Ammonium iron(II) sulfate]]<br>[[Iron(III) sulfate]]
 +
  }}
 +
}}
 +
'''Iron(II) sulfate''', also known as '''ferrous sulfate '''is the sulfate salt of the iron(II) ion. It is most commonly seen as the heptahydrate which forms blue-green crystals. It is a brownish-white powder when anhydrous. The old name for the iron(II) sulfate is '''green vitriol'''.
  
 
==Properties==
 
==Properties==
Line 6: Line 116:
 
Iron(II) sulfate is an easy source of iron(II) ions in solution, since it is readily available and not expensive.
 
Iron(II) sulfate is an easy source of iron(II) ions in solution, since it is readily available and not expensive.
  
Upon standing in air, iron(II) sulfate will oxidize to a mixture of [[Iron(III) sulfate|iron(III) sulfate]] and [[iron(III) oxide]] because iron(II) compounds are not stable when not kept at a low pH. This can be prevented by adding a small amount of [[sulfuric acid]]. When heated to 680°C, iron(II) sulfate begins to decompose, releasing [[sulfur dioxide]] and [[sulfur trioxide]], leaving behind iron(III) oxide. It also reacts with [[hydrogen peroxide]].
+
Upon standing in air, iron(II) sulfate will oxidize to a mixture of [[Iron(III) sulfate|iron(III) sulfate]] and [[iron(III) oxide]] because iron(II) compounds are not stable when not kept at a low pH. This can be prevented by adding a small amount of [[sulfuric acid]].
  
2 FeSO<sub>4</sub> → Fe<sub>2</sub>O<sub>3</sub> + SO<sub>2</sub> + SO<sub>3</sub>
+
When heated to 680°C, iron(II) sulfate begins to decompose, releasing [[sulfur dioxide]] and [[sulfur trioxide]], leaving behind iron(III) oxide.
 +
 
 +
: 2 FeSO<sub>4</sub> → Fe<sub>2</sub>O<sub>3</sub> + SO<sub>2</sub> + SO<sub>3</sub>
 +
 
 +
It also reacts with [[hydrogen peroxide]], forming Fe(III).
  
 
===Physical===
 
===Physical===
Line 14: Line 128:
  
 
==Availability==
 
==Availability==
Iron(II) sulfate heptahydrate can be found at some garden stores, and can also be bought cheaply online.<ref>http://www.elementalscientific.net/store/scripts/prodView.asp?idproduct=1905</ref> Its purity when bought can be told by its color, impure samples having a dark green color and brown to gray hue.
+
Iron(II) sulfate heptahydrate can be found at some garden stores as soil iron supplement, and can also be bought cheaply online.<ref>http://www.elementalscientific.net/store/scripts/prodView.asp?idproduct=1905</ref> Its purity when bought can be told by its color, impure samples having a dark green color and brown to gray hue.
  
 
==Preparation==
 
==Preparation==
Iron(II) sulfate can be prepared with iron or steel scraps and ''dilute ''sulfuric acid. Concentrated sulfuric acid will not work. If steel is used, the carbon must be filtered out after the reaction is complete. Do not leave the solution to crystallize by evaporation, as the product will become oxidized and impure. Instead, it must be heated without boiling until crystals are visible, cooled, and then dried in a dessicator.<ref>http://www.crscientific.com/ferroussulfate.html</ref>
+
Iron(II) sulfate can be prepared with [[iron]] or [[steel]] scraps and ''dilute'' [[sulfuric acid]]. Concentrated sulfuric acid will not work. If steel is used, the carbon must be filtered out after the reaction is complete. Do not leave the solution to crystallize by evaporation, as the product will become oxidized and impure. Instead, it must be heated without boiling until crystals are visible, cooled, and then dried in a dessicator.<ref>http://www.crscientific.com/ferroussulfate.html</ref>
  
Iron(II) sulfate is produced by addition of iron to [[copper(II) sulfate]]. During this reaction, the carbon from steel will leach, forming a black goo between the copper layer and iron. [[Copper(II) oxide]] will also form, which, because it's also black, will make it difficult to determine how much metallic copper was oxidized. Eliminating the air from water prior to the reaction or adding a very small quantity of acid will reduce the formation of the copper oxide and increase the yield.
+
Iron(II) sulfate is produced by addition of metallic iron to [[copper(II) sulfate]]. If steel is used, the carbon from steel will leach in the solution, forming a black goo between the copper layer and iron. [[Copper(II) oxide]] will also form, which, because it's also black, will make it difficult to determine how much metallic copper was oxidized. Eliminating the air from water prior to the reaction or adding a very small quantity of acid will reduce the formation of the copper oxide and increase the yield.
  
 
==Projects==
 
==Projects==
 +
*Make [[ammonium iron(II) sulfate|Mohr's salt]]
 
*Make [[Iron gall ink|iron gall ink]]
 
*Make [[Iron gall ink|iron gall ink]]
 
*Make [[iron(III) sulfate]]
 
*Make [[iron(III) sulfate]]
 +
*Grow beautiful crystals
 +
*Make sulfur trioxide
  
 
==Handling==
 
==Handling==
Line 30: Line 147:
  
 
===Storage===
 
===Storage===
Ferrous sulfate should be stored in closed bottles, away from moisture.
+
Ferrous sulfate should be stored in closed bottles, away from moisture. Since it will oxidize in air even when dry, it's best to keep it in air-tight containers.
  
 
===Disposal===
 
===Disposal===
Ferrous sulfate does not require special disposal.
+
Ferrous sulfate does not require special disposal and can be safely poured down the drain of released in the ground.
  
 
==References==
 
==References==
Line 39: Line 156:
 
===Relevant Sciencemadness threads===
 
===Relevant Sciencemadness threads===
 
*[https://www.sciencemadness.org/whisper/viewthread.php?tid=31203 Iron Gall Ink]
 
*[https://www.sciencemadness.org/whisper/viewthread.php?tid=31203 Iron Gall Ink]
 +
*[http://www.sciencemadness.org/talk/viewthread.php?tid=4823 Electrolysis of FeSO4]
  
 
[[Category:Chemical compounds]]
 
[[Category:Chemical compounds]]
Line 45: Line 163:
 
[[Category:Sulfates]]
 
[[Category:Sulfates]]
 
[[Category:Easily prepared chemicals]]
 
[[Category:Easily prepared chemicals]]
 +
[[Category:Readily available chemicals]]
 +
[[Category:Chemicals for crystal growing]]
 +
[[Category:Air-sensitive materials]]
 +
[[Category:Essential reagents]]

Latest revision as of 14:51, 18 November 2023

Iron(II) sulfate
Iron(II) sulfate Zts16.jpg
Iron(II) sulfate heptahydrate prepared from steel and sulfuric acid (looks more blue in person)
Names
IUPAC name
Iron(II) sulfate
Other names
Copperas, ferrous sulfate, green vitriol, iron vitriol, melanterite, szomolnokite
Properties
FeSO4 (anhydrous)
FeSO4·H2O (monohydrate)
FeSO4·5 H2O (pentahydrate)
FeSO4·6 H2O (hexahydrate)
FeSO4·7 H2O (heptahydrate)
Molar mass 151.91 g/mol (anhydrous)
169.93 g/mol (monohydrate)
241.99 g/mol (pentahydrate)
260.00 g/mol (hexahydrate)
278.02 g/mol (heptahydrate)
Appearance White crystals (anhydrous)
White-yellow crystals (monohydrate)
Blue-green crystals (heptahydrate)
Odor Odorless
Density 3.65 g/cm3 (anhydrous)
3 g/cm3 (monohydrate)
2.15 g/cm3 (pentahydrate)
1.934 g/cm3 (hexahydrate)
1.895 g/cm3 (heptahydrate)
Melting point anhydrous
680 °C (1,256 °F; 953 K) (decomposes)
monohydrate
300 °C (572 °F; 573 K) (decomposes)
heptahydrate
60–64 °C (140–147 °F; 333–337 K) (decomposes)
Boiling point Decomposes
Monohydrate
44.69 g/100 ml (77 °C)
35.97 g/100 ml (90.1 °C)
Heptahydrate
15.65 g/100 ml (0 °C)
20.5 g/100 ml (10 °C)
29.51 g/100 ml (25 °C)
39.89 g/100 ml (40.1 °C)
51.35 g/100 ml (54 °C)
Solubility Slightly soluble in acids, ethanol, methanol
Insoluble in hydrocarbons
Solubility in ethylene glycol 6.4 g/100 g (20 °C)
Vapor pressure 1.95 kPa (heptahydrate)
Hazards
Safety data sheet Sigma-Aldrich (heptahydrate)
Flash point Non-flammable
Related compounds
Related compounds
Ammonium iron(II) sulfate
Iron(III) sulfate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Iron(II) sulfate, also known as ferrous sulfate is the sulfate salt of the iron(II) ion. It is most commonly seen as the heptahydrate which forms blue-green crystals. It is a brownish-white powder when anhydrous. The old name for the iron(II) sulfate is green vitriol.

Properties

Chemical

Iron(II) sulfate is an easy source of iron(II) ions in solution, since it is readily available and not expensive.

Upon standing in air, iron(II) sulfate will oxidize to a mixture of iron(III) sulfate and iron(III) oxide because iron(II) compounds are not stable when not kept at a low pH. This can be prevented by adding a small amount of sulfuric acid.

When heated to 680°C, iron(II) sulfate begins to decompose, releasing sulfur dioxide and sulfur trioxide, leaving behind iron(III) oxide.

2 FeSO4 → Fe2O3 + SO2 + SO3

It also reacts with hydrogen peroxide, forming Fe(III).

Physical

Iron(II) sulfate is usually seen as the heptahydrate, which forms blue-green crystals. When heated to around 300°C, it loses all of its water of crystallization[1]

Availability

Iron(II) sulfate heptahydrate can be found at some garden stores as soil iron supplement, and can also be bought cheaply online.[2] Its purity when bought can be told by its color, impure samples having a dark green color and brown to gray hue.

Preparation

Iron(II) sulfate can be prepared with iron or steel scraps and dilute sulfuric acid. Concentrated sulfuric acid will not work. If steel is used, the carbon must be filtered out after the reaction is complete. Do not leave the solution to crystallize by evaporation, as the product will become oxidized and impure. Instead, it must be heated without boiling until crystals are visible, cooled, and then dried in a dessicator.[3]

Iron(II) sulfate is produced by addition of metallic iron to copper(II) sulfate. If steel is used, the carbon from steel will leach in the solution, forming a black goo between the copper layer and iron. Copper(II) oxide will also form, which, because it's also black, will make it difficult to determine how much metallic copper was oxidized. Eliminating the air from water prior to the reaction or adding a very small quantity of acid will reduce the formation of the copper oxide and increase the yield.

Projects

Handling

Safety

Wet iron sulfate should not be handled directly, as it may contain excess sulfuric acid that can burn the skin, if an excess of acid was used. This is not an issue if the sulfate was prepared with copper(II) sulfate and iron metal.

Storage

Ferrous sulfate should be stored in closed bottles, away from moisture. Since it will oxidize in air even when dry, it's best to keep it in air-tight containers.

Disposal

Ferrous sulfate does not require special disposal and can be safely poured down the drain of released in the ground.

References

  1. http://en.wikipedia.org/wiki/Iron%28II%29_sulfate
  2. http://www.elementalscientific.net/store/scripts/prodView.asp?idproduct=1905
  3. http://www.crscientific.com/ferroussulfate.html

Relevant Sciencemadness threads