Difference between revisions of "Barium peroxide"
| Line 112: | Line 112: | ||
==Properties== | ==Properties== | ||
===Chemical=== | ===Chemical=== | ||
| − | Barium peroxide can be used to produce highly concentrated [[hydrogen peroxide]] via its reaction with [[sulfuric acid]]. | + | Barium peroxide can be used to produce highly concentrated [[hydrogen peroxide]] via its reaction with conc. [[sulfuric acid]]. |
:BaO<sub>2</sub> + H<sub>2</sub>SO<sub>4</sub> → H<sub>2</sub>O<sub>2</sub> + BaSO<sub>4</sub> | :BaO<sub>2</sub> + H<sub>2</sub>SO<sub>4</sub> → H<sub>2</sub>O<sub>2</sub> + BaSO<sub>4</sub> | ||
Revision as of 19:13, 23 February 2020
| Names | |
|---|---|
| IUPAC name
Barium peroxide
| |
| Other names
Barium binoxide
Barium dioxide | |
| Properties | |
| BaO2 | |
| Molar mass | 169.33 g/mol (anhydrous) 313.45 (octahydrate) |
| Appearance | Grey-white crystalline (anhydrous) Colorless solid (octahydrate) |
| Odor | Odorless |
| Density | 5.68 g/cm3 (anhydrous) 2.292 g/cm3 (octahydrate) |
| Melting point | 450 °C (842 °F; 723 K) |
| Boiling point | 800 °C (1,470 °F; 1,070 K) (decomposes) |
| anhydrous 0.091 g/100 ml (20 °C) octahydrate 0.168 g/100 ml | |
| Solubility | Reacts with acids Insoluble in hydrocarbons |
| Vapor pressure | ~0 mmHg |
| Hazards | |
| Safety data sheet | Sigma-Aldrich |
| Flash point | Non-flammable |
| Related compounds | |
| Related compounds
|
Barium oxide |
| Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
| Infobox references | |
Barium peroxide is the inorganic compound with the formula BaO2.
Contents
Properties
Chemical
Barium peroxide can be used to produce highly concentrated hydrogen peroxide via its reaction with conc. sulfuric acid.
- BaO2 + H2SO4 → H2O2 + BaSO4
The insoluble barium sulfate is filtered from the mixture.
Physical
Barium peroxide is a white solid, insoluble in water.
Availability
Barium peroxide is sold by lab suppliers. So far there aren't any sellers on eBay and Amazon.
Preparation
Barium peroxide can be made by the reversible reaction of O2 with barium oxide. The peroxide forms around 500 °C and oxygen is released above 820 °C.
- 2 BaO + O2 ⇌ 2 BaO2
Projects
- Flash powders and fireworks
- Make concentrated hydrogen peroxide
Handling
Safety
Barium peroxide is corrosive and an oxidizer. Proper protection must be worn when handling this compound.
Storage
Barium peroxide should be kept in closed plastic or glass bottles.
Disposal
Can be neutralized by adding diluted sulfuric acid then iron oxide, to decompose the hydrogen peroxide.
