Difference between revisions of "Hydroxylamine"

From Sciencemadness Wiki
Jump to: navigation, search
(Preparation)
Line 155: Line 155:
  
 
Reaction of [[nitrogen dioxide]] or nitrous acid with [[tin(II) chloride]] will give hydroxylamine. The yield is 90%.<ref>[http://onlinelibrary.wiley.com/doi/10.1002/zaac.19261550122/full Raschig, F.; Z. Anorg. Chem.; vol. 155; (1926); p. 225]</ref>
 
Reaction of [[nitrogen dioxide]] or nitrous acid with [[tin(II) chloride]] will give hydroxylamine. The yield is 90%.<ref>[http://onlinelibrary.wiley.com/doi/10.1002/zaac.19261550122/full Raschig, F.; Z. Anorg. Chem.; vol. 155; (1926); p. 225]</ref>
 +
 +
Reduction of [[nitric oxide]] with tin(II) chloride in hydrochloric acid at 0 °C  will also yield hydroxylamine.<ref>https://pubs.acs.org/doi/10.1021/j150323a006</ref>
  
 
Hydroxylamine can also be made by heating [[nitromethane]] with concentrated [[hydrochloric acid]]. This gives hydroxylamine hydrochloride:
 
Hydroxylamine can also be made by heating [[nitromethane]] with concentrated [[hydrochloric acid]]. This gives hydroxylamine hydrochloride:

Revision as of 19:27, 26 August 2018

Hydroxylamine
Names
IUPAC name
Hydroxylamine
Other names
Azinous acid
Aminol
Azanol
Hydroxyamine
Hydroxyazane
Hydroxylazane
Nitrinous acid
Properties
NH2OH
Molar mass 33.03 g/mol
Appearance White hygroscopic crystals
Density 1.227 g /cm3 (at 20 °C)
Melting point 33 °C (91 °F; 306 K)
Boiling point 70 °C (158 °F; 343 K) (at 60 mm Hg; decomposes)
Soluble
Solubility Soluble in liq. ammonia, ethanol, methanol
Poorly soluble in diethyl ether, carbon disulfide, chloroform, propanol,
Insoluble in acetone, benzene, petroleum ether, hydrogen sulfide
Vapor pressure 53 mm Hg at 32 °C
Acidity (pKa) 5.95
Thermochemistry
236.18 J·K−1·mol−1
−39.9 kJ·mol−1
Hazards
Flash point Explodes at 129 °C
Lethal dose or concentration (LD, LC):
408 mg/kg (oral, mouse)
9–70 mg/kg (intraperitoneal mouse, rat); 29 mg/kg (subcutaneous, rat)
Related compounds
Related compounds
Ammonia
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Hydroxylamine is a white crystalline solid, widely used as a reducing agent. It has the chemical formula NH2OH.

As pure hydroxylamine is unstable and explosive, its salts such as hydroxylammonium chloride are more often used. It can also be encountered as aqueous solution.

Properties

Chemical

Hydroxylamine reacts with acids to give hydroxylammonium salts.

Reaction with copper(II) oxide gives nitrous oxide:

2 NH2OH + 4 CuO → 2 Cu2O + N2O + 3 H2O

Physical

Hydroxylamine is a white crystalline solid, hygroscopic and unstable when pure. It is very soluble in water and alcohol.

Explosive

Freebase hydroxylamine can explode if heated.

Availability

Pure hydroxylamine is not sold by any entity. However, aqueous solutions are sold by many chemical entities, though they're not readily accessible to the amateur chemist.

Hydroxylammonium salts are also available.

Preparation

Hydroxylamine can be prepared through various means:

The Raschig process is the most common route. It involves the reduction of ammonium nitrite with bisulfite (HSO3) and sulfur dioxide at 0 °C in water to hydroxylamido-N,N-disulfonate anion, which hydrolyzes to give hydroxylamine sulfate.

NH4NO2 + 2 SO2 + NH3 + H2O → 2 NH4+ + N(OH)(OSO2)22-
N(OH)(OSO2)22− + H2O → NH(OH)(OSO2)- + HSO4-
2 NH(OH)(OSO2) + 2 H2O → (NH3OH)2SO4 + SO42-

To obtain pure hydroxylamine, anhydrous ammonia is added:

(NH3OH)2SO4 + 2 NH3 → 2 NH2OH +(NH4)2SO4

Since free hydroxylamine quickly breaks down, the final product is either dissolved in water or reacted with a strong acid, like hydrochloric acid.

Other nitrites, such as nitrous acid or sodium nitrite can also be reduced with bisulfite to hydroxylamine.

Electrolytic reduction of nitric acid with sulfuric acid at 15-20 °C for 40 minutes at 24 A gives hydroxylamine:

HNO3 + 3 H2 → NH2OH + 2 H2O

Other acids, such as hydrochloric and phosphoric acids can also be used. The yield of this route is between 50-80%.[1]

Electrolysis of sodium nitrate in the presence of hydrogen chloride will also give hydroxylamine. A lead cathode and a coal anode are used as electrodes. The process takes 3 hours.[2]

Reaction of nitrogen dioxide or nitrous acid with tin(II) chloride will give hydroxylamine. The yield is 90%.[3]

Reduction of nitric oxide with tin(II) chloride in hydrochloric acid at 0 °C will also yield hydroxylamine.[4]

Hydroxylamine can also be made by heating nitromethane with concentrated hydrochloric acid. This gives hydroxylamine hydrochloride:

CH3NO2 + HCl → NH2OH·HCl + 2 H2O + CO

Projects

  • Make oximes
  • Make hydroxylammonium nitrate
  • Purify ketones and aldehydes
  • Make nitrous oxide
  • Caprolactam synthesis
  • Make Nylon 6
  • Make formaldoxime

Handling

Safety

Hydroxylamine is an irritant to the respiratory tract, skin, eyes, and other mucous membranes. It is harmful if swallowed and may be absorbed through the skin. Hydroxylamine is considered a possible mutagen.

Hydroxylamine explodes upon heating, though the exact mechanism is not well understood. Ferrous and ferric salts accelerate its decomposition in aqueous solution.

Storage

Hydroxylamine is safe to store only as aqueous solution or in salt form.

Disposal

Hydroxylamine can be neutralized by adding a ketone and then gently heating the resulting oxime, which reforms the ketone and releases nitrogen gas and water. It can also be neutralized by diluting it with water and carefully adding iron salts or other compounds that accelerate its decomposition.

Reduction of hydroxylamine with Zn/HCl yields ammonia.

References

  1. Schoch, E. P.; Pritchett, R. H.; Journal of the American Chemical Society; vol. 38; (1916); p. 2042
  2. Tafel, J.; Z. Anorg. Chem.; vol. 31; (1902); p. 321 - 324
  3. Raschig, F.; Z. Anorg. Chem.; vol. 155; (1926); p. 225
  4. https://pubs.acs.org/doi/10.1021/j150323a006

Relevant Sciencemadness threads