Difference between revisions of "Sodium bisulfate"

From Sciencemadness Wiki
Jump to: navigation, search
(Relevant Sciencemadness threads)
 
(10 intermediate revisions by the same user not shown)
Line 11: Line 11:
 
| ImageAlt =  
 
| ImageAlt =  
 
| ImageName =  
 
| ImageName =  
| ImageCaption = Sodium bisulfate.
+
| ImageCaption = Sodium bisulfate from the store
 
| ImageFile1 =  
 
| ImageFile1 =  
 
| ImageSize1 =  
 
| ImageSize1 =  
Line 61: Line 61:
 
| MeltingPtC =  
 
| MeltingPtC =  
 
| MeltingPt_ref =  
 
| MeltingPt_ref =  
| MeltingPt_notes = 58.5 °C (137.3 °F; 331.6 K) (monohydrate)<br>315 °C (anhydrous, decomposes)
+
| MeltingPt_notes = 58.5 °C (137.3 °F; 331.6 K) (monohydrate)<br>315 °C (599 °F; 588.15 K) (anhydrous, decomposes)
| pKa =  
+
| Odor = Slight, acidic
 +
| pKa = 1.99
 
| pKb =  
 
| pKb =  
 
| Solubility = 28.5 g/100 ml (25 °C)<br>100 g/100 ml (100 °C)
 
| Solubility = 28.5 g/100 ml (25 °C)<br>100 g/100 ml (100 °C)
| SolubleOther = Insoluble in [[ammonia]], [[ethanol]], [[pyridine]], [[toluene]], [[xylene]]
+
| SolubleOther = Reacts with bases<br>Insoluble in [[ammonia]], [[ethanol]], [[pyridine]], [[toluene]], [[xylene]]
 
| Solvent =  
 
| Solvent =  
 
| VaporPressure =  
 
| VaporPressure =  
Line 89: Line 90:
 
| Section6 = {{Chembox Hazards
 
| Section6 = {{Chembox Hazards
 
| AutoignitionPt = Non-flammable
 
| AutoignitionPt = Non-flammable
| ExploLimits =  
+
| ExploLimits = Non-explosive
 
| ExternalMSDS = [https://www.docdroid.net/9ydHURV/sodium-bisulfate-sa.pdf.html Sigma-Aldrich]
 
| ExternalMSDS = [https://www.docdroid.net/9ydHURV/sodium-bisulfate-sa.pdf.html Sigma-Aldrich]
 
| FlashPt = Non-flammable
 
| FlashPt = Non-flammable
| LD50 =  
+
| LD50 = 2,490 mg/kg (rat, oral)
 
| LC50 =  
 
| LC50 =  
 
| MainHazards = Irritant<br>Corrosive
 
| MainHazards = Irritant<br>Corrosive
Line 108: Line 109:
 
   }}
 
   }}
 
}}
 
}}
'''Sodium bisulfate''', also known as '''sodium hydrogen sulfate''' is the sodium salt of the bisulfate anion, with the molecular formula '''NaHSO<sub>4</sub>'''. It is an [[acid salt]], formed by the partial neutralization of [[sulfuric acid]] with an equivalent of sodium, usually [[sodium chloride]] or [[sodium hydroxide]].
+
'''Sodium bisulfate''', also known as '''sodium hydrogen sulfate''', is the sodium salt of the bisulfate anion, with the molecular formula '''NaHSO<sub>4</sub>'''. It is an [[acid salt]], formed by the partial neutralization of [[sulfuric acid]] with an equivalent of sodium, usually [[sodium chloride]] or [[sodium hydroxide]].
  
 
==Properties==
 
==Properties==
 
===Chemical===
 
===Chemical===
Sodium bisulfate will react with [[sodium chloride]] to release [[hydrogen chloride]].
+
Sodium bisulfate will react with [[sodium chloride]] to release [[hydrogen chloride]]. Heat accelerates the reaction.
:NaHSO<sub>4</sub> + NaCl → Na<sub>2</sub>SO<sub>4</sub> + HCl
+
 
 +
: NaHSO<sub>4</sub> + NaCl → Na<sub>2</sub>SO<sub>4</sub> + HCl
 +
 
 
Sodium bisulfate is an acid salt. Heating (and even just sitting) can release [[sulfuric acid]] vapors, from small amounts to large quantities of fumes.
 
Sodium bisulfate is an acid salt. Heating (and even just sitting) can release [[sulfuric acid]] vapors, from small amounts to large quantities of fumes.
  
 
===Physical===
 
===Physical===
Sodium bisulfate is a white dry granular product, soluble in water. The anhydrous form is hygroscopic. Solutions of sodium bisulfate are acidic, 1 M solution having a pH of < 1.
+
Sodium bisulfate is a white dry granular product, soluble in water and acids. The anhydrous form is hygroscopic. Solutions of sodium bisulfate are acidic, 1 M solution having a pH of < 1.
  
 
==Availability==
 
==Availability==
Sodium bisulfate is available as a pH lowering chemical for swimming pools.
+
Sodium bisulfate is available as a pH lowering chemical for swimming pools in most hardware stores and it's fairly pure.
  
 
==Preparation==
 
==Preparation==
Sodium bisulfate is made by mixing stoichiometric quantities of sodium hydroxide or sodium chloride and [[sulfuric acid]].
+
Sodium bisulfate is made by mixing stoichiometric quantities of [[sodium hydroxide]] or [[sodium chloride]] and [[sulfuric acid]].
:NaOH + H<sub>2</sub>SO<sub>4</sub> → NaHSO<sub>4</sub> + H<sub>2</sub>O
+
: NaOH + H<sub>2</sub>SO<sub>4</sub> → NaHSO<sub>4</sub> + H<sub>2</sub>O
:NaCl + H<sub>2</sub>SO<sub>4</sub> → NaHSO<sub>4</sub> + HCl
+
: NaCl + H<sub>2</sub>SO<sub>4</sub> → NaHSO<sub>4</sub> + HCl
  
 
==Projects==
 
==Projects==
*Make [[hydrochloric acid]]
+
*Make [[hydrogen chloride]] and [[hydrochloric acid]]
 
*Make [[sodium pyrosulfate]] and [[sulfur trioxide]]
 
*Make [[sodium pyrosulfate]] and [[sulfur trioxide]]
 
*Make nitric acid (it will give off mostly [[nitrogen dioxide]] fumes if you use an alkali nitrate)<ref>http://www.sciencemadness.org/talk/viewthread.php?tid=18767</ref><ref>https://www.youtube.com/watch?v=TtPiwbRA4N8</ref>
 
*Make nitric acid (it will give off mostly [[nitrogen dioxide]] fumes if you use an alkali nitrate)<ref>http://www.sciencemadness.org/talk/viewthread.php?tid=18767</ref><ref>https://www.youtube.com/watch?v=TtPiwbRA4N8</ref>
Line 137: Line 140:
  
 
===Storage===
 
===Storage===
Sodium bisulfate should be stored in closed bottles. You should open them periodically to release any acid vapors inside.
+
Sodium bisulfate should be stored in closed bottles. You should open them periodically outside to release any acidic vapors inside.
  
 
===Disposal===
 
===Disposal===
Sodium bisulfate is not very dangerous to the environment, though it should be neutralized first before disposal.
+
Sodium bisulfate is not very dangerous to the environment in small quantities, though it should be neutralized first before disposal. A base like [[sodium carbonate]] or bicarbonate in aqueous solution can be used. While you can pour it down the drain, avoid dumping it in the ground, as the sodium ions are harmful to plants.
  
 
==References==
 
==References==
Line 156: Line 159:
 
[[Category:Acid salts]]
 
[[Category:Acid salts]]
 
[[Category:Readily available chemicals]]
 
[[Category:Readily available chemicals]]
 +
[[Category:Essential reagents]]

Latest revision as of 13:56, 18 November 2023

Sodium bisulfate
Sodium bisulfate.jpg
Sodium bisulfate from the store
Names
IUPAC name
Sodium hydrogen sulfate
Other names
Bisulfate of soda
Sodium acid sulfate
Properties
NaHSO4
Molar mass 120.06 g/mol (anhydrous)
138.07 g/mol (monohydrate)
Appearance Colorless solid
Odor Slight, acidic
Density 2.742 g/cm3 (anhydrous)
1.8 g/cm3 (monohydrate)
Melting point 58.5 °C (137.3 °F; 331.6 K) (monohydrate)
315 °C (599 °F; 588.15 K) (anhydrous, decomposes)
Boiling point Decomposes
28.5 g/100 ml (25 °C)
100 g/100 ml (100 °C)
Solubility Reacts with bases
Insoluble in ammonia, ethanol, pyridine, toluene, xylene
Acidity (pKa) 1.99
Hazards
Safety data sheet Sigma-Aldrich
Flash point Non-flammable
Lethal dose or concentration (LD, LC):
2,490 mg/kg (rat, oral)
Related compounds
Related compounds
Sodium sulfate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Sodium bisulfate, also known as sodium hydrogen sulfate, is the sodium salt of the bisulfate anion, with the molecular formula NaHSO4. It is an acid salt, formed by the partial neutralization of sulfuric acid with an equivalent of sodium, usually sodium chloride or sodium hydroxide.

Properties

Chemical

Sodium bisulfate will react with sodium chloride to release hydrogen chloride. Heat accelerates the reaction.

NaHSO4 + NaCl → Na2SO4 + HCl

Sodium bisulfate is an acid salt. Heating (and even just sitting) can release sulfuric acid vapors, from small amounts to large quantities of fumes.

Physical

Sodium bisulfate is a white dry granular product, soluble in water and acids. The anhydrous form is hygroscopic. Solutions of sodium bisulfate are acidic, 1 M solution having a pH of < 1.

Availability

Sodium bisulfate is available as a pH lowering chemical for swimming pools in most hardware stores and it's fairly pure.

Preparation

Sodium bisulfate is made by mixing stoichiometric quantities of sodium hydroxide or sodium chloride and sulfuric acid.

NaOH + H2SO4 → NaHSO4 + H2O
NaCl + H2SO4 → NaHSO4 + HCl

Projects

Handling

Safety

Sodium bisulfate will irritate the skin, eyes and mucous tissues on contact. Despite being a salt rather than a fully saturated acid, sodium bisulfate solutions have a much lower pH than many acids themselves, and should be treated with care. Prolonged exposure will damage the tissues.[3] Do not attempt to smell sodium bisulfate. It is common for a sample to release sulfuric acid vapors, and these can build up in a container.[4]

Storage

Sodium bisulfate should be stored in closed bottles. You should open them periodically outside to release any acidic vapors inside.

Disposal

Sodium bisulfate is not very dangerous to the environment in small quantities, though it should be neutralized first before disposal. A base like sodium carbonate or bicarbonate in aqueous solution can be used. While you can pour it down the drain, avoid dumping it in the ground, as the sodium ions are harmful to plants.

References

  1. http://www.sciencemadness.org/talk/viewthread.php?tid=18767
  2. https://www.youtube.com/watch?v=TtPiwbRA4N8
  3. http://www.sciencelab.com/msds.php?msdsId=9927267
  4. "The Volatile Chemist's" personal experience

Relevant Sciencemadness threads