Trimethyl borate

From Sciencemadness Wiki
Revision as of 20:08, 23 June 2018 by Mabus (Talk | contribs)

Jump to: navigation, search
Trimethyl borate
Trimethyl borate methanol azeotrope distilled by NurdRage.png
Azeotrope of 75% trimethyl borate and 25% methanol
Trimethyl borate.png
Structure of the compound
Names
IUPAC name
Trimethyl borate
Other names
Boron trimethoxide
Trimethoxyborane
Trimethoxyboron
Properties
C3H9BO3
Molar mass 103.91 g/mol
Appearance Colorless liquid
Density 0.932 g/cm3
Melting point −34 °C (−29 °F; 239 K)
Boiling point 68 °C (154 °F; 341 K)
Reacts
Solubility Reacts with carboxylic acids
Miscible with acetone, diethyl ether, ethanol, heptane, hexane, isopropanol, isopropylamine, methanol, mineral oil, THF
Vapor pressure 137 mmHg at 25 °C
Hazards
Safety data sheet Sigma-Aldrich
Flash point -8 °C
Lethal dose or concentration (LD, LC):
6.140 mg/kg (rat, oral)
1.845 mg/kg (rabbit, dermal)
Related compounds
Related compounds
Triethyl borate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Trimethyl borate is a boron triester consisting of a single boron atom bound to three methoxide groups. It is a volatile liquid that ignites easily to give a brilliant green flame, purer than that of barium. It may be produced readily in large quantities.

Properties

Chemical

Trimethyl borate, being produced by dehydration, decomposes into methanol and boric acid on exposure to water. It burns in the presence of oxygen to form boron trioxide. In flames, it emits a brilliant green color that overpowers many other flame colors, as evidenced here.

Physical

Trimethyl borate is a colorless liquid at room temperature, that evaporates easily. It has a melting point of −34 °C and boils at 68 °C. It will decompose in water and acids.

Availability

Relatively pure trimethyl borate can be bought from only a few chemical suppliers as it has few commercial applications. It is by far cheaper and more practical to produce it.

Preparation

Trimethyl borate can be produced by adding an excess of dry methanol to boric acid or, preferably, boric oxide, with a small amount of sulfuric acid and/or some heating to dehydrate the mixture if needed.

Projects

Handling

Safety

There is little data on the toxicity of trimethyl borate. Nevertheless, it is a good idea not to consume or inhale it, and its hydrolysis products aren't exactly healthy. Keep away from open flame. Water may be used to put out trimethyl borate flames. When igniting trimethyl borate, goggles should be worn to prevent boric oxide dust from irritating the eyes.

Storage

Trimethyl borate should only be stored in closed bottles, away from light or any heat source. Since it is sensitive to water, it's best to keep the bottle airtight or put it into a desiccator.

Disposal

Trimethyl borate can be safely burned. It will hydrolyze in water to yield methanol and boric acid, which can be safely disposed of.

See also

References

Relevant Sciencemadness threads